Adding a BNC Output

The original E-200D had a funky old-style output connector.  I don't even know what type of connector it is.  And I sure don't have any cables that fit it!  So I changed mine to a BNC connector.  You can to!

1.  You will need to disassemble your unit.  Follow the disassembly instructions on the

     main page.  You do not need to remove the main shield cover, only the cover over

     the attenuator switches.

2.  Remove the old output connector.

3.  You will happily discover that a BNC bulkhead connector fits right in place!  Do not

     get a bulkhead connector with a square flange, it must have a round flange.  I

     believe that Radio Shack sells a suitable one.

Here are some pictures of my unit with a BNC connector in place: